On a special two port module used to feed two other water valves (a two port 5 gear), the gear is placed on a different pin and allows the module to rotate at a much slower speed. Satisfaction Guarantee: Provides a 100% satisfied after-sales service. There are no individual parts of the module that can be replaced; you must replace the entire module, but it is very easy to do so. Step 1: Take off the band clamp.
Step 2: Take the dome off the water valve. Step 3: Pull the old module out of the Water Valve Base, which will pull straight up. Step 4: Replace the new module back into Water Valve Base. Tip: It doesn't matter what position the new module goes into the base.Step 5: Inspect and lubricate O-ring. Step 6: Replace the dome and the band clamp. (1) Check the O-ring and groove for debris, and clean if necessary. Ring is stretched or damaged, replace it. Rings do not require any lubrication, lubricated?
Rings attract dirt and debris that can interfere with the seal. (3) Put the module into the base and turn it until the positioning pin on the bottom of the module falls into the positioning hole of the base. 6-Port Valve Module x1, Valve Base O-Ring (005302010000) x1. If you are not satisfied for any reasons, please do not be so quick to leave negative/neutral feedback. Above Ground Pools, Hot Tubs, Inflatable & Kid Pools, In Ground Pools. All Water Types, Brackish, Fresh, Marine, Pond. Automatic Empty Function, Corrosion Resistant, Portable, Telescopic.Brush Nozzle, Fittings, Full Instructions, Hose Extension, Power Cord. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Cleaning Tools\Pool Cleaners & Vacuums". The seller is "j-flower009" and is located in this country: US. This item can be shipped to United States.