5200mAh Automatic Cordless Robotic Pool Cleaner Vacuum Above/In Ground 120 Mins
Fashion Curved Design Hydro Dynamic Design Intelligent Hall System 5200mAh Battery Pack(6cell) 35W Symmetric Dual Motors Long Dual Suction Ports Suction Power/Flow Rate: 25GPM(95LPM) 120 Mins Outrageous Runtime 3 Hours Fast Charging 20s Rapid Water Release Filter Basket Capacity: 2L Auto-Parking Auto-Steering Adaptive Speed Control Intelligent Escape from Difficulties Ideal for above-ground and flat floored inground pools Clean up to 914 sq. Can climb up a slope? Detection in water(60s self-check): Accurately identify the water environment, save power on land. Delay to start in water(25s delayed) 3.
Filter-in-place detection: To ensure filters installed. Hall system detection: Precise detection of the host.
X1 Cordless Automatic Robotic Pool Vacuum Cleaner for Above Ground Pools, 5200mAh Battery, 3 Hours Fast Charging, Lasts 120 Mins. X1 Cordless Robotic Pool Cleaner. You can see the hall rotor directly. Reduce resistance from the water, absorb the waste from the pool more effectively. Control the status of the host in real time; Free your hands completely.
Increased 20% more than other pool cleaners in the industry. Higher-efficiency cleaning, and larger cleaning area. Can clean up to 914 sq. 5200mAh large capacity battery pack(6cell).
Fully charged in 3 hours. Working time up to 120 mins. Can drain all stored water in just 20 seconds. The robot will automatically adjust its movement speed based on the current terrain to save energy and improve efficiency. Can climb up a slope?
When the garbage tray is full (filter blocked), or the battery is below 10%, the robot will automatically approach the wall of the poll to make it retrieved easily by you. When the robot comes against to the wall of the pool or other obstacles, it will automatically. Change its direction within 6 seconds. When it is unable to move around in a place for long time, the robot will do an action of getting rid in a loop to different directions at its maximum power till it escapes from the trap successfully. Simple Installation & Easy Cleaning. Modular design, can be simply installed by both the old and kids. The filter tray is easy to clean. Just remove the cover, and rinse it by a hose.(NOTE: We suggest you clean the hall rotor and filter every time you use the robot, to ensure they are not block, and keep the whole device longer service life). Detection in water (60s self-check): Generally, the robot can only work in water. The robot will be checked by the sensor whether it is on land or in water. If the machine is self-checked it is not in water, its will make out a continuous "beep" error sound. The default time is 1 minute.
If the robot is not in water in 1 minute, it will automatically shut down to save power. Delay to start in water (25s delayed): To ensure the machine goes into the water smoothly, or avoid it rolling while it sinks, the robot will start working in 25 seconds from the time when it enters into the water. Filter-in-place detection: To avoid filters missing, result in ineffective cleaning. Feedback is very important to us. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you can return it or ask for a discount. Business Hour: Monday To Friday. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.