Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms

Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms
Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms
Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms
Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms
Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms
Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms

Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms

SUPER QUIETLY & EASY TO INSTALL & EFFICIENT CLEANNING: Our pool vacuum cleaner is very easy to assemble and install and allows you to clean your pool effortlessly and quietly. In order to get great usage effect, should be no air in hoses before using.

Make sure the hoses in no leak and the pressure is normal. Low noise, create a quiet operate environment. One year, if any part of this item broken you can for a free.

We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order, please keep in touch with us, we'll always provide you a timely and satisfying solution. FREE HOSES: Our swimming pool vacuum come with ten durable hoses and two diaphragms for. You can attaches this pool sweeper to your existing filtration system.

SAVE YOUR TIME: VINGLI pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It keeps the pool clean, and it will cut down a lot on your time spent cleaning the pool.

POWERFUL SUNTION VACUUM & CAN'T STUCK: This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently remove dirt, debris. Wheel Deflector for movement around tight corners.

Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces. NOTE: Please notice that it doesn't include a power supply and requires at least a 3/4hp swimming pool pump or Minimum Flow of 6.5m3/hour/1700gal/hr. We recommend to adjust the weights and the regulator valve to get the best results for a clean pool.

If the vacuum can stop work, please kindly to check if there is a crack of the diaphragm mouth. In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool. The pool vacuum can clean algae, dirt and dust but can not clean leaves. Just drop into the base of pool and the max deep is 9.8ft.

Vacuum head, blue skirt and hose size display. Comes with ten hoses, two weight, one regulating valve, diaphragm. If the hose is too long or too short, you can increase or reduce hose. Each hose diameter is 1.96 inch. There a special hose which need to connect to pool vacuum, and other hose neen to connect with that. Come with 10 hoses total 33 ft, each hose is 3.3ft. White little weight can keep balance when you clean the pool and seal the hose. Need to install the blue disc counterclockwis. The diaphragm is silent and service life is 200 hours. If the vacuum doesn't work, please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.

If suction is too large or small, need to adjust the regulating valve. If vacuum stop work when it reaches the surface of the pool, you need to adjsut regulating valve and adjust suction lower.

Problem: Cleaner is sluggish or has stopped operating. Check if the pump is ON and / or primed.

Check Cleaner head for blockages. Clean and empty pump basket and empty skimmer/weir basket. Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool pump as per manufacturers specifications. Inspect the regulator valve and flush away any debris build-up.

Check the Mat for wear. Make sure the curved tips of the Mat are facing upwards.

Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks. Check the hose for blockage. Check the hose for leaks by lifting each section above water while pump is running. Consult a pool shop in your area. Problem: Cleaner travels in a repetitive pattern.

Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary. This should be done at the deepest part of the pool. Remove or add one hose section. Inspect the Regulator Valve and flush away any debris build-up.

Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax the memory. Twist each hose section a half-turn at each connection point.


Swimming Pool Vacuum Cleaner Automatic Sweeper, with 10 Hoses & 2 Diaphragms